字典九九>英语词典>deflections翻译和用法

deflections

英 [dɪˈflɛkʃənz]

n.  (尤指击中某物后)突然转向,偏斜,偏离
deflection的复数

柯林斯词典

  • N-VAR 偏斜;偏转
    Thedeflectionof something means making it change direction.
    1. ...the deflection of light as it passes through the slits in the grating.
      光线通过光栅狭缝时的偏转
  • (体育运动中球击中某物后的)转向,变向
    In sport, thedeflectionof a ball, kick, or shot is when the ball hits an object and then travels in a different direction.

    双语例句

    • And on the right, you notice that there are many of those sharp deflections.
      在右侧,大家看到,有很多明显的变位。
    • Equations are established based on the principle of deflections consistency.
      根据板簧变形协调原理,导出相应的方程。
    • The associated permitted deflections shall be included in the contract documents.
      相关许可挠度应当包含在合同文件中。
    • The major application of these data is to define the control deflections required to stabilize the vehicle.
      这些数据的主要应用是确定稳定飞行器所需要的控制偏角。
    • Experimental results indicate that the cracks weaken the strength of slabs, lower their stiffness, and induce the deflections of slabs beyond limit.
      试验结果表明,支座边的裂缝严重削弱了板的承载力,降低了楼板的刚度,导致楼板的挠度过大。
    • Analysis to Large Deflections of Elastic Cantilever Beam with Constraint under Uniformly Distributed Load
      均布载荷下变形受约束悬臂梁弹性大变形分析
    • The test results showed that the fracture deflections of the composite coatings and the fractal dimensions of the fractured surfaces decreased with increasing the contents of hard phases.
      测量了多相材料复合涂层的断裂挠度和断口表面的分形维数,分析了复合涂层的断裂特征结果表明:随着硬质相增加,复合涂层的断裂挠度和断口表面的分形维数降。
    • Vertical elements carry sufficient load through cantilever action to produce cantilever deflections equal to arch deflections.
      垂直杆件则借悬臂作用产生和拱挠度相等的悬臂挠度,来承担足够的荷载。
    • The effects of some parameters, such as the plate thickness, radius of the filled foundation, on the maximum deflections and stress, are also investigated.
      最后研究了盖层厚度、填充半径对位移、应力的影响规律。
    • An increase in resistance to roll deflections may be gained by splitting the single strut into a fork at the top.
      采用上部分呈叉状的单支杆可以增强抗滚转变形性能。