字典九九>英语词典>deflexion翻译和用法

deflexion

n.  偏斜,偏转

英英释义

noun

双语例句

  • It compute the parameter of deflexion caused by thermal distortion in orbit, deduce the general expression for spreading beam after thermal distortion of reflector and the center deflexion of facula received in CCD.
    计算了在轨运行条件下反射镜面热变形引起的表面法向偏转参数,推导了镜面变形后出射光线的通用表达式以及镜面变形前后在CCD探测器上的接收光斑中心偏转量的计算表达式。
  • The research of closed loop tension measure system for deflexion loop
    偏转线圈绕线机闭环张力信号检测系统的研究
  • The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic.
    细晶、裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。
  • For example, how to match the CVT with dynamic system? How much key structure factors are there in CVT and how to define them? The belt will deflect while CVT is working. How to increase the life of the belt according to deflexion?
    例如:CVT系统与动力系统如何匹配?CVT系统的关键结构参数有那些,如何确定?CVT系统工作过程中皮带产生偏斜,如何控制偏斜以增加皮带的使用寿命等。
  • In production, analyze how the modify of the thickness of its main, subsidiary angle iron influences the whole steel column ′ s deflexion with this arithmetic also, and here by control the weight of the materials and make its shape size measure up to the standard.
    在生产中用该算法也可以分析钢柱主、副角钢厚度变化对整个钢柱挠度的影响,从而要求在生产中应严格控制原材料的质量,使其外形尺寸必须符合标准要求。
  • Based on the strength calculation of main girder on two transporter cranes using finite element method and field measurement of the working stress, this paper analyses the causes for the cantilevered end deflexion of the main girder and presents the repair procedure as well as the after-repair status.
    通过用有限元法对装卸桥主梁进行强度计算及对其工作应力进行现场测试,分析了悬臂端下挠的原因,介绍了修复的方法和效果。
  • So liquid crystal grating is used in extensive field such as diffraction optics, photoelectric switch, deflexion controlling of light beam.
    因此液晶光栅的这种光电特性在衍射光学、光电开关、光束偏转控制等许多领域具有广泛的应用前景。
  • It is suggested that fibre pulling out and interbedded crack deflexion are the major toughing mechanism in the asymmetrical FGM.
    HA(ZrO2)-316L不锈钢纤维FGM中,分析认为,增韧机理主要为纤维拔出增韧和层间裂纹偏转增韧。
  • The response of mechanism deflexion is slowly, which velocity and precision are confinement each other.
    机械偏转响应慢,偏转速度与控制精度相互制约。
  • The flow field of cutting comminution is simulated and analysed by computational fluid dynamics software FLUENT. From which we received the impeller form and deflexion angle of blade most in favor of cutting comminution, and proved that the high-speed cutting comminution have a economic rotational speed.
    利用流体分析软件FLUENT对切割粉碎流场建模,并在进行数值分析后,得到了最有利于切割粉碎的叶轮形式、刀片偏角,提出了高速切割粉碎设备粉碎物料存在一个经济转速。