short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路，走捷径
short-circuit的现在分词

柯林斯词典

• V-ERG (使)短路
  If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
  1. Carbon dust and oil build up in large motors and cause them to short-circuit...
     碳尘和燃油在大发动机里越积越多，造成了发动机短路。
  2. Once inside they short-circuited the electronic security.
     一旦置入，它们就会使电子安全设施短路。
  3. Short-circuitis also a noun.
     
  4. The fire was started by an electrical short-circuit.
     火灾是由电线短路引发的。
• VERB 回避，绕过（某一流程或程序)
  If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
  1. The approach was intended to short-circuit normal complaints procedures.
     这种方法旨在避开正常的投诉程序。

双语例句

• Adaptive control system with constant frequency of droplet transfer for waveform controlled short-circuiting co_2 arc welding
  波控短路过渡CO2焊接恒频自适应控制系统
• Analysis of synchronous multi-information and experimental research of short-circuiting transfer process in CO 2 arc welding
  CO2焊短路过渡过程的同步多信息分析及试验
• The direct current reactor is used in order to obtain favorable dynamic property and attain the request of short-circuiting transfer to welding power supply, which makes the welding machine obtain excellent welding performance.
  为获得良好的动特性，达到短路过渡对焊接电源的要求，加入了直流电抗器，从而使焊机具有良好的动特性，获得优良的焊接工艺性能。
• Short-circuiting Effect and the Solution in Gnutella Network
  Gnutella网络中的短路效应及其解决方案
• The weld quality under different welding conditions is related to the welding parameters which are inherent electrical parameters in the welding process itself, i.e. welding current, welding voltage, arc sound, short-circuiting frequency and so on.
  不同工艺条件下的焊接质量的好坏，肯定会反映在与焊接过程本身固有的焊接工艺参数上，如焊接电流、焊接电压、电弧声压、熔滴过渡频率等等。
• Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.
  短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
• In order to take into account the synthetic influence of all characteristic parameters, by means of the characteristic parameters synthetic value, a quantitative evaluation function is built up to describe and real time evaluate the short-circuiting transfer process of CO2 arc welding.
  为综合考虑这些参数的影响，以特征参数综合值来描述和实时评判CO2焊接短路过渡过程，得到一个能全面定量描述和评判CO2焊接过程的综合评价函数。
• Based on the approximate entropy theory and related algorithm, approximate entropy analysis of current in short-circuiting arc welding in CO_2 shielding gas are performed from the point of view of nonlinear time sequences.
  依据近似熵的理论和算法，从非线性角度对纯CO2保护气体条件下短路过渡电弧焊的电流信号进行了近似熵分析。
• The short-circuiting transfer is a main form of CO2 arc welding droplet transfer. The arc welding short-circuiting transfer process and the current waveform control process of a developed new type waveform controller a simulated.
  对CO2弧焊短路过渡过程，以及研制的一种新型波控器的电流波形控制过程进行了计算机模拟仿真，仿真结果与实验吻合。
• He found that, by charging a capacitor to various voltages and discharging it by short-circuiting it with the fuse, he could create a controlled amount of surge current.
  他发现通过电容充电到各种电压，用保险丝短路放电，可以形成一个可控的浪涌电流。