slaking
英 [ˈsleɪkɪŋ]
美 [ˈsleɪkɪŋ]
v. 缓和(口渴); 解(渴); 满足(欲望)
slake的现在分词
柯林斯词典
- VERB 解(渴)
If youslakeyour thirst, you drink something that stops you being thirsty.- I slaked my thirst with three cans of Coke.
我喝了 3 罐可乐解渴。
- I slaked my thirst with three cans of Coke.
双语例句
- Study and optimization of lime slaking technology
石灰消化工艺的研究与优化 - Further slaking tests were conducted by taking slaking solution which leaches out from red sand mixed with cement or lime, obtained the treatment countermeasures to inhibit red sandstone slaking by mixing with lime.
进一步将掺水泥、石灰的改良红砂土浸出液作为水解液进行崩解试验,得到了可采用掺石灰对红砂岩的崩解性进行抑制的工程处治对策。 - The lime slaking rate is the important factor of the quality of the hydrated production.
生石灰的转化率是衡量消化产物品质的重要因素; - Through studying and optimizing lime slaking process, it analyzed the mechanism of lime slaking reaction and found the optimum operating conditions to increase the activity of lime milk.
其目的是研究和优化石灰消化工艺,分析石灰消化反应机理,找到最佳的消化操作条件,提高石灰乳的活性。 - Experimental studies on engineering properties of red bed material containing slaking rock
含崩解软岩红层材料路用工程特性试验研究 - Lime slaking rate is decreasing with lime particle diameter.
消化速率随着石灰粒径的减小而明显增大; - The gelling process of HPAM/ Cr3+ microgel system in static state and shearing state was compared. The effect of rate of shearing, polymer concentration, temperature and time of slaking of solution to the gelling of microgel were studied.
对HPAM/Cr3+微凝胶体系在静态和剪切状态下成胶过程进行了对比,并且考察了剪切速率、聚合物浓度、温度及聚合物溶液熟化时间对微凝胶成胶的影响。 - Factors Influencing the Slaking of Expansive Soil ( Rock) and Methods to Reduce Slaking
膨胀土(岩)湿化性的影响因素及降低湿化性的途径和方法 - The hydration process of lime has important influence on lime slaking rate 、 particle size and specific surface, so it is significant to research the hydration process.
生石灰的消化工艺无论是对消化产物的粒径、比表面积和孔隙率还是含水率都有很大的影响,因此有必要进行实验研究。 - Dry slaking of quick lime impacts greatly on the conversion rate of lime, solid particle size, specific surface area and porosity, and determines the quality of the prepared desulfurization agent.
生石灰干式消化工艺对石灰粉的转化率、固体颗粒大小以及消石灰的比表面积和孔隙率都有很大影响,直接关系到脱硫剂品质的好坏。
