squish

英 [skwɪʃ]

美 [skwɪʃ]

v.  (被)压坏，挤坏; 发吧唧声; 发吱嘎声

过去分词：squished　过去式：squished　现在分词：squishing　第三人称单数：squishes　

BNC.48495 / COCA.19433

牛津词典

verb

• （被）压坏，挤坏
  if sth soft squishes or is squished , it is crushed out of shape when it is pressed
• 发吧唧声；发吱嘎声
  to make a soft wet sucking sound

英英释义

noun

• the noise of soft mud being walked on

verb

• put (a liquid) into a container or another place by means of a squirting action
• walk through mud or mire
  1. We had to splosh across the wet meadow
  Synonym:squelchsplashsploshsloshslop

双语例句

• An investigation of squish air motion in compression ignition engines
  压燃式发动机中挤流运动的研究
• It'll help squish out all that water I've been retaining.
  它能帮我把我一直保持的水份全都挤出来。
• The air motion in UCS combustion system is much stronger than that in base combustion system and the strong reversed squish lasts longer in the former than in the latter because the former has a far larger squish area than the latter.
  伞帘喷雾燃烧系统的挤气面积远大于原机，因此前者的空气运动明显强于后者，较强逆挤流维持的时间长于后者。
• By comparison, straight wall chamber ( type A) is easy to be manufactured, has the lowest thermal stress and has obvious squish. Type A is the best combustion room choice.
  比较而言，直壁ω型燃烧室最易制造，热应力较小，挤流作用明显，为最佳燃烧室方案。
• Squish the ellipse to about half the size.
  挤椭圆约一半大小。
• As the small and medium sized high-speed direct injection diesel engine needs strong intake swirl, squish compression and combustion turbulence, its intake port generally made spiral or tangential shape.
  对于中小型高速直喷式柴油机，因其需要较强的进气涡流、压缩挤流和燃烧紊流，其进气道一般做成螺旋的或切向的形状。
• Valves are clustered near the center of the bore to minimize combustion chamber volume and to provide ample squish area.
  阀门是聚集在附近的孔中心，以尽量减少燃烧室量，以及提供足够的果酱领域。
• Study on Combustion Chamber Squish Velocity and Heat Release in a Moped 2-stroke Engine
  二冲程汽油机燃烧室挤流和放热规律的研究
• Let's squish it horizontally.
  把它水平地压扁。
• During the compression stroke the turbulence kinetic energy decreases due to the dissipation effect, while the turbulence kinetic energy in the center of the cylinder increases as a result of the squish effect.
  缸内平均湍动能强度在进气冲程中总体呈先增大后减小的趋势，压缩冲程中耗散作用使湍动能降低，但挤流作用使气缸中部的湍动能升高；